Fan Filter Unit ffu are an essential component of cleanroom environments. They are designed to provide clean air to these critical environments by removing airborne particles, dust, and contaminants. These units are typically installed in areas where high levels of cleanliness are required, such as semiconductor manufacturing plants, pharmaceutical laboratories, and medical facilities.
Fan filter units (FFUs) are essential components of cleanrooms, laboratories, and other controlled environments. These units are designed to filter and circulate air, removing contaminants and ensuring a clean and safe environment. Fan filter unit installation is crucial to their lev effect.
The primary function of an FFU is to circulate clean air through a high-efficiency particulate air (HEPA) filter. The ffu HEPA filter is designed to remove particles as small as 0.3 microns, ensuring that the air entering the cleanroom is free from contaminants. The FFU works by drawing in air from the surrounding environment, passing it through the HEPA filter, and then releasing it into the cleanroom. And the cleanroom ffu can be divided into HEPA fa filter unit and ULPA fan filter unit. Laminar Flow Hood Fan Filter Unit FFU.
FFUs are available in a range of sizes and configurations to meet the specific needs of different cleanroom environments. They can be mounted on the ceiling or floor and can be designed to provide either horizontal or vertical airflow. The size and number of FFUs required will depend on the size of the cleanroom and the level of cleanliness required.
| Model | FFU0606G/S/A1M-H/U | FFU0906G/S/A1M-H/U | FFU1206G/S/A1M-H/U | FFU1209G/S/A1M-H/U | FFU1212G/S/A1M-H/U | ||||||
| Size(mm) AC motor | Normal | 575×575×320 | 875×575×320 | 1175×575×320 | 1175×875×320 | 1175×1175×320 | |||||
Bottom loading | 575×575×370 | 875×575×370 | 1175×575×370 | 1175×875×370 | 1175×1175×320 | ||||||
Face wind speed | H | S | H | S | H | H | H | ||||
| 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | |||||||
Machine residual external pressure（pa） | 50 | 120 | 50 | 120 | 50 | 120 | 50 | 120 | 50 | 120 | |
Standard working condition power consumption（W） | 80 | 150 | 90 | 160 | 110 | 180 | 210 | 220 | 250 | 260 | |
Maximum power consumption（W） | AC motor | 180 | 130 | 230 | 150 | 250 | 280 | 320 | |||
Single noise dB(A) | DC motor | 49 | 52 | 49 | 52 | 50 | 53 | 52 | 55 | 53 | 56 |
HEPA filtration efficiency | 99.995%(@0.3µm) / 99.9995%(@0.12µm) | ||||||||||
| HEPA SIZE(MM) | Normal | 570×570×70 | 870×570×70 | 1170×570×70 | 1170×870×70 | 1170×1170×70 | |||||
| Bottom loading | 570×570×110 | 870×570×110 | 1170×570×110 | 1170×870×110 | 1170×1170×110 | ||||||
Power supply | AC single item,220V/50HV | ||||||||||
Way to control | AC motor | AC motor FFU can realize three-speed speed regulation, five-speed speed regulation, remote control, and group control | |||||||||
Box material | Galvalume, aluminum, stainless steel（SUS304、SUS430、SUS201） | ||||||||||
Note:
1. H is a high static pressure type, S is a standard type;
2. FFUs of the above specifications are not equipped with phase-effect filters, if you need to be equipped with coarse-efficiency filters, you need to add an explanation when ordering, and the height of the FFU is also Will increase by 30mm accordingly.
3 Standard operating conditions refer to the operating conditions when the rated wind speed is 0.45m/s and the residual pressure outside the machine is 50Pa (120Pa).
4. The maximum power consumption is the power consumption when the FFU air volume is at its maximum.
We have many kinds of motors that can be chosen. Such as the Gebhardt fan filter unit, EBM, XIANGMING, etc.
At the same time, we have many years of project engineering customers and cooperated with many design institutes, which can help you design the best solution.
