Mini pleat hepa filter H14 570*570*70 mm

Description

H14 Mini pleat hepa filter  is made of ultra-fine glass fiber as the filter material, glued paper and aluminum foil as the separator, and glued together with the wooden frame, aluminum alloy frame, and galvanized frame. Its main characteristics are high filtration efficiency and low resistance. Large air volume.

Mini pleat hepa filter H14 Filter 570 x 570 x 70 mm

Mini pleat HEPA filter production line

The core of the H14 Mini pleat HEPA filter is to use ultra-fine glass fiber or PP fiber filter paper as filter material, use hot melt adhesive as separator, and assemble with various outer frames, so the appearance is very generous and beautiful, and it is compatible with other products.

Characteristics:

1. Outer frame of the high-efficiency filter without partition: aluminum profile, surface anodized;

2. Filtration efficiency: 99.97%-99.999% (H13, H14);

3. Filter separation: hot melt adhesive;

4. Laser counting and scanning detection one by one before leaving the factory;

5. Filter material: glass fiber filter paper MPPS=easy to penetrate particle size;

6. Device sealant: polyurethane Continuous operating temperature: ≤ 80°C;

7. Gasket: polyurethane/closed-cell neoprene bead;

8. Moisture resistance: ≤100% RH;

9. Protective net: steel net sprayed with plastic, white RAL9016;

10. There are metal nets on the air inlet and outlet sides.

Compared with the partition high-efficiency filter, even under the same air volume condition, its volume is relatively small and its weight is very light. Therefore, it is very suitable for purification occasions that require high coverage of high-efficiency filters.

H14 HEPA filter can be widely used in optical electronics, LCD liquid crystal manufacturing, biomedicine, precision instruments, beverages and food, etc.

Welcome to contact us!